Plastic Bottle Juice Hot Filling Machine / Line With 40 Rinsing

Heads

Description

1). The raw water will be purified and sterilized after passing through the water treatment system, and will

be stored in the purified water storage tank;

2). The juice will be prepared by the juice preparation system, the prepared juice is stored in the

insulation tank (for heat preservation) temporarily;

3). Automatic heat resistance PET bottle blow molding machine is connected with the water filling

machine by the Air conveyor;

4). Prepared juice will be pumped into the juice filling machine; At the same time, empty bottles pass

through the sterilizing,rinsing, filling and capping 4-in-1 monoblock, the bottles will be rinsed, filled and

capped.

5). Bottled water goes out from the water filling machine and will be transferred to the bottle over-turn

sterilizing machine, the cap and the bottle mouth will be sterilized after passing through the sterilizing

machine, then the bottles will be transferred to the bottle cooling machine;

6). The bottles are getting dried after passing through the blowing dryer, and the dried bottle will go to the

labeling machine and PE film shrink wrapping machine;

7). The packed bottle water will come out from the PE film shrink wrapping machine.

Advantages

1). Full filling to avoid the liquid level from sinking after the bottle cooling down, and to decrease the

dissolved oxygen to the utmost extent.

2). Reasonable structured storage hopper and material supply system make the material in constant flow

speed, constant pressure without frothing. Usually high position tank is adopted.

3). The storage hopper has the characteristic of gas discharge, full sealing and temperature detecting. In

moderate and high speed production line, the material distributor replaces the big liquid tank to realize

the complete CIP.

4). Sanitary filling head system is of umbrella structure, high filling speed.

5). Perfect filling temperature control system.

6). Reflux tank system has the function of supplying the material automatically.

7). Perfect CIP system.

Technique parameters:

We provide this RCGF40-40-40-12 juice filling line for our Congo's customer,these pictures are

photographed by our engineers when they installed the machines in Congo

If you want the video of it ,please kindly leave message to me,I can show

you the video of whole this juice filling line

fruit juice production line

juice bottling machine

40 Rinsing Heads Juice Bottling Machine , Automatic Juice Filling Machine 6250*3050*2400mm Images